Z-Flash OBD-II for Ford
The Z-Flash Plug and Play Flasher for Ford vehicles is easily activated with the included switch or hardwire cable.
The Z-Flash Plug and Play Flasher for Ford vehicles offers two installation options: use the all-in-one switch that requires no external power or connect the device with the hardwire cable to an external controller or switch panel for greater control.
Designed for select Ford vehicles, the Z-Flash plugs directly into the OBD-II port, allowing you to flash your vehicle’s high beams, fog lights, front and rear turn signals, and reverse lights, enhancing visibility and safety. This non-invasive system will not damage your vehicle and can be easily removed whenever needed.
Upgrade your Ford vehicle’s lighting system with the Z-Flash Plug and Play Flasher for quick, reliable performance and improved road safety.
Download the Z-Flash Software for your flasher here
What's Included:
- (1) Z-Flash Module
- (1) Hardwire
- (1) Switch
Tech Specs:
- Made in the USA!
- Six Customizable Flash Patterns while in Park
- One Pattern For Drive
- Includes switch, mounting strip, and hardwire cable
- Custom software to activate, deactivate, and create custom flash patterns
- When activated, the Z-Flash Plug and Play Flasher for Ford vehicles can flash:
- High beam headlights
- Fog lights when activated
- Front turn signals
- Reverse lights
- Rear turn signals
When activated, the Z-Flash Plug and Play Flasher for Ford Vehicles can flash:
- High beam headlights
- Fog lights when activated
- Front turn signals
- Reverse lights
- Rear turn signals
Activation:
How it Works:
- Simply plug the module into your vehicle's OBD port and connect the toggle switch or hardwire kit.
- The red light will flash for about five seconds while it boots.
- It will blink green when it is ready.
Click Here to request a Z-Flash for your vehicle!
Frequently ask questions
-
No, the Z-Flash will not damage the vehicle. The module is plug-and-plug and requires no splicing. It can be removed anytime and leaves no trace of being installed. The Z-Flash is significantly safer for a vehicle's electrical system than traditional aftermarket emergency vehicle lighting.
-
No, the Z-Flash is plug-and-play and does not require permanent modifications to the vehicle. They can be removed and reinstalled and leave no trace of being in the vehicle.
-
This depends on local and state regulations. In many areas, the use of flashing headlights is restricted to emergency and authorized vehicles on public roads. The Z-Flash is legal to use at most car shows.
-
The Z-Flash generally consumes very little power when not in use. It is always recommended to ensure the vehicle’s engine is running when using the device. The Z-Flash uses very little power when off, but like most aftermarket vehicle products, it may drain the battery when the vehicle is in long term storage.
-
Yes, the Z-Flash can often be used alongside other emergency or auxiliary lighting systems. The Z-Flash can be powered on using a 12V controller, switch box, or upfitter switch.
-
No, the Z-Flash is designed to be installed inside the vehicle and has no waterproofing rating. It should be installed in the cab and not in the engine compartment or any other wet areas.
Z-Flash Testimonials
